High Impact Resistance,Strong adaptability to temperature change
Unique mechanical design enables the device with an impact resistance of 10G/6ms and vibration resistance of 10-55Hz/1.5mm in XYZ for 2 hours.
Individual temperature compensation technology enables the device measurement results not to be afected by temperature change*.
*The measurement diameter change <0.00lmm when temperature change is 40'℃ if the object diameter is 10mm.
Measurement is accurate even if there is water and dust
Thanks to individual optical system and measurement algorithm, the measurement data of TL-2000S Series is still accurate at complex environment.
Environmental adaptability reaches to IP67.Besides,air filter is available to prevent lens front side from contamination ,ensuring measurement data is accurate at various extremely complex environment.
Touch Screen,Computer,Cellphone
DALA TL-2025D can be managed by touch screen,computer and cellphone,like parameter setting ,measurement data management ,and so on,customers can choose as their application request.
size
Technical Specification
| Model | TL-2006S | TL-2025S |
| Axis | 1-axis | 1-axis |
| Sampling frequency | 5KHz | 10KHz |
| Measurement range | 0.02~6mm | 0.2~25mm |
| Repeatability | ±0.03μm(1) | ±0.1μm(2) |
| Measurement accuracy | ±0.5μm(3) | ±3μm(4) |
| Working power | 24VDC ± 5%, Max. 30W |
| Application field | Round wire ,Transparent wire, Flat wire |
| Measurement data | Round wire, clear wire, flat wire,rod stock, tubing, etc. |
| Communication port | Default:WIFI,RS485 MODBUS RTU,CAN
Option:PROFIBUS,PROFINET, EtherNet/IP EtherNet,etc. |
| Electrical port | Default:Digital output (relay), Digital input,Analog input encoder pulse input port.
Option: PI feedback control(3) |
| Environmental adaptability | Working Environment | 0~50 ℃ |
| Working Environment | 20~85%RH(No condensation) |
| Working environmental brightness | Brightness of working environment Incandescent light, fluorescent lamp 3000lx or less |
| Vibrating resistance | 10~55Hz full amplitude 1.5mm in XYZ direction for 2 hours |
| Impact resistance | 10G/6ms |
| Data colletion & analysis | DMS1000 measurement software system,DS14 ZT display and control system |
| Out-of-tolerance alarm | Support |
| Transparent mode | Support |
| Water-proof grade | IP67 |
NOTE:
(1)Set average time to 0.1s and measure the ±2σvalue of the φ1mm round rod at the measurement area center;
(2)Set average time to 0.1s and measure the ±2σvalue of the φ10mm round rod at the measurement area center;
(3)Move φ1mm round rod in the measurement area of 2*2mm and conduct measurement error;
(4)Move φ9mm round rod in the measurement area of8*8mm and conduct measurement error;Move φ18mm round rod in the measurement area of4*4mm and conduct measurement error;
